You are here:Home/Anatomic/Displaying items by tag: Anatomic

 

See Features

Technical features Anatomic

  • Instructional information: All instructions can be easily read from the exercise position. It includes user instructions and range of motion diagram, plus a description and a drawing of the muscles used during the exercise
  • Belt transmission: The kevlar reinforced belt used can stand up to ten times the required force
  • Guided rods: Hard-chrome and polished steel guided rods, free of wear and corrosion
  • Weight plates: Power coated calibrated cast iron plates with polished edges and with free floating bushings to ensure smooth travel
  • Frame: 4 mm structural steel tube and MIG welding
  • Paint: Polyester powder coat paint, metalized, offering an attractive and durable finish. Available in 15 different colors
  • Pulley wheels: Made of reinforced nylon to assure maximum resistance. It has grooved inside edges for a silent and smooth functioning
  • Enclosure: Translucent design permits weight travel visualization. Also safety UE norm 957 –1/2 is fully complied
  • Pads and platforms: High-density foam (150 kg / cm). Foot platforms and other areas are covered with 3M, anti –slippery material to assure stability and protect paint
  • Selector pin: Positive locking selector pin with ball locking mechanism to keep the pin securely in place during exercise. Security lanyard (pigtail) to avoid loss or theft. Always accessible from working position
  • Hand grips: Made of long lasting, anti-slip, antiallergic and comfortable rubber.
  • Cams: All cams have been designed to fit the particular muscle group profile in order to accurately match the capabilities of each muscle
  • Rom limiter:  Start and end position ROM limiter essential in rehabilitation patients, with clear numbering and signals for easy use
  • Upholstery: SKAY Pyton, resistant to user’s transpiration and wear. Available in 15 different colours
  • Anatomic upholstery: Made of individual parts adapted to back anatomy.
  • Porch: Height of 1388 mm for an ampler vision during the exercise and a general visual space
  • Arm and foot lever advances: When required, arm and foot lever advances have been included to enable user to advance the exercise lever to the start position.
  • Counterbalanced exercise arms: Eliminates the effect of the weight of the exercise lever. Permits the user to lift only the amount of weight selected, allowing lowest possible initial weight
  • Numbers in all regulations
  • Easy readjustment of the belt
Published in Plate loaded

 

See Features

Technical features Anatomic

  • Instructional information: All instructions can be easily read from the exercise position. It includes user instructions and range of motion diagram, plus a description and a drawing of the muscles used during the exercise
  • Belt transmission: The kevlar reinforced belt used can stand up to ten times the required force
  • Guided rods: Hard-chrome and polished steel guided rods, free of wear and corrosion
  • Weight plates: Power coated calibrated cast iron plates with polished edges and with free floating bushings to ensure smooth travel
  • Frame: 4 mm structural steel tube and MIG welding
  • Paint: Polyester powder coat paint, metalized, offering an attractive and durable finish. Available in 15 different colors
  • Pulley wheels: Made of reinforced nylon to assure maximum resistance. It has grooved inside edges for a silent and smooth functioning
  • Enclosure: Translucent design permits weight travel visualization. Also safety UE norm 957 –1/2 is fully complied
  • Pads and platforms: High-density foam (150 kg / cm). Foot platforms and other areas are covered with 3M, anti –slippery material to assure stability and protect paint
  • Selector pin: Positive locking selector pin with ball locking mechanism to keep the pin securely in place during exercise. Security lanyard (pigtail) to avoid loss or theft. Always accessible from working position
  • Hand grips: Made of long lasting, anti-slip, antiallergic and comfortable rubber.
  • Cams: All cams have been designed to fit the particular muscle group profile in order to accurately match the capabilities of each muscle
  • Rom limiter:  Start and end position ROM limiter essential in rehabilitation patients, with clear numbering and signals for easy use
  • Upholstery: SKAY Pyton, resistant to user’s transpiration and wear. Available in 15 different colours
  • Anatomic upholstery: Made of individual parts adapted to back anatomy.
  • Porch: Height of 1388 mm for an ampler vision during the exercise and a general visual space
  • Arm and foot lever advances: When required, arm and foot lever advances have been included to enable user to advance the exercise lever to the start position.
  • Counterbalanced exercise arms: Eliminates the effect of the weight of the exercise lever. Permits the user to lift only the amount of weight selected, allowing lowest possible initial weight
  • Numbers in all regulations
  • Easy readjustment of the belt
Published in Multistation

 

See Features

Technical features Anatomic

  • Instructional information: All instructions can be easily read from the exercise position. It includes user instructions and range of motion diagram, plus a description and a drawing of the muscles used during the exercise
  • Belt transmission: The kevlar reinforced belt used can stand up to ten times the required force
  • Guided rods: Hard-chrome and polished steel guided rods, free of wear and corrosion
  • Weight plates: Power coated calibrated cast iron plates with polished edges and with free floating bushings to ensure smooth travel
  • Frame: 4 mm structural steel tube and MIG welding
  • Paint: Polyester powder coat paint, metalized, offering an attractive and durable finish. Available in 15 different colors
  • Pulley wheels: Made of reinforced nylon to assure maximum resistance. It has grooved inside edges for a silent and smooth functioning
  • Enclosure: Translucent design permits weight travel visualization. Also safety UE norm 957 –1/2 is fully complied
  • Pads and platforms: High-density foam (150 kg / cm). Foot platforms and other areas are covered with 3M, anti –slippery material to assure stability and protect paint
  • Selector pin: Positive locking selector pin with ball locking mechanism to keep the pin securely in place during exercise. Security lanyard (pigtail) to avoid loss or theft. Always accessible from working position
  • Hand grips: Made of long lasting, anti-slip, antiallergic and comfortable rubber.
  • Cams: All cams have been designed to fit the particular muscle group profile in order to accurately match the capabilities of each muscle
  • Rom limiter:  Start and end position ROM limiter essential in rehabilitation patients, with clear numbering and signals for easy use
  • Upholstery: SKAY Pyton, resistant to user’s transpiration and wear. Available in 15 different colours
  • Anatomic upholstery: Made of individual parts adapted to back anatomy.
  • Porch: Height of 1388 mm for an ampler vision during the exercise and a general visual space
  • Arm and foot lever advances: When required, arm and foot lever advances have been included to enable user to advance the exercise lever to the start position.
  • Counterbalanced exercise arms: Eliminates the effect of the weight of the exercise lever. Permits the user to lift only the amount of weight selected, allowing lowest possible initial weight
  • Numbers in all regulations
  • Easy readjustment of the belt
Published in lower body

 

See Features

Technical features Anatomic

  • Instructional information: All instructions can be easily read from the exercise position. It includes user instructions and range of motion diagram, plus a description and a drawing of the muscles used during the exercise
  • Belt transmission: The kevlar reinforced belt used can stand up to ten times the required force
  • Guided rods: Hard-chrome and polished steel guided rods, free of wear and corrosion
  • Weight plates: Power coated calibrated cast iron plates with polished edges and with free floating bushings to ensure smooth travel
  • Frame: 4 mm structural steel tube and MIG welding
  • Paint: Polyester powder coat paint, metalized, offering an attractive and durable finish. Available in 15 different colors
  • Pulley wheels: Made of reinforced nylon to assure maximum resistance. It has grooved inside edges for a silent and smooth functioning
  • Enclosure: Translucent design permits weight travel visualization. Also safety UE norm 957 –1/2 is fully complied
  • Pads and platforms: High-density foam (150 kg / cm). Foot platforms and other areas are covered with 3M, anti –slippery material to assure stability and protect paint
  • Selector pin: Positive locking selector pin with ball locking mechanism to keep the pin securely in place during exercise. Security lanyard (pigtail) to avoid loss or theft. Always accessible from working position
  • Hand grips: Made of long lasting, anti-slip, antiallergic and comfortable rubber.
  • Cams: All cams have been designed to fit the particular muscle group profile in order to accurately match the capabilities of each muscle
  • Rom limiter:  Start and end position ROM limiter essential in rehabilitation patients, with clear numbering and signals for easy use
  • Upholstery: SKAY Pyton, resistant to user’s transpiration and wear. Available in 15 different colours
  • Anatomic upholstery: Made of individual parts adapted to back anatomy.
  • Porch: Height of 1388 mm for an ampler vision during the exercise and a general visual space
  • Arm and foot lever advances: When required, arm and foot lever advances have been included to enable user to advance the exercise lever to the start position.
  • Counterbalanced exercise arms: Eliminates the effect of the weight of the exercise lever. Permits the user to lift only the amount of weight selected, allowing lowest possible initial weight
  • Numbers in all regulations
  • Easy readjustment of the belt
Published in lower body

 

See Features

Technical features Anatomic

  • Instructional information: All instructions can be easily read from the exercise position. It includes user instructions and range of motion diagram, plus a description and a drawing of the muscles used during the exercise
  • Belt transmission: The kevlar reinforced belt used can stand up to ten times the required force
  • Guided rods: Hard-chrome and polished steel guided rods, free of wear and corrosion
  • Weight plates: Power coated calibrated cast iron plates with polished edges and with free floating bushings to ensure smooth travel
  • Frame: 4 mm structural steel tube and MIG welding
  • Paint: Polyester powder coat paint, metalized, offering an attractive and durable finish. Available in 15 different colors
  • Pulley wheels: Made of reinforced nylon to assure maximum resistance. It has grooved inside edges for a silent and smooth functioning
  • Enclosure: Translucent design permits weight travel visualization. Also safety UE norm 957 –1/2 is fully complied
  • Pads and platforms: High-density foam (150 kg / cm). Foot platforms and other areas are covered with 3M, anti –slippery material to assure stability and protect paint
  • Selector pin: Positive locking selector pin with ball locking mechanism to keep the pin securely in place during exercise. Security lanyard (pigtail) to avoid loss or theft. Always accessible from working position
  • Hand grips: Made of long lasting, anti-slip, antiallergic and comfortable rubber.
  • Cams: All cams have been designed to fit the particular muscle group profile in order to accurately match the capabilities of each muscle
  • Rom limiter:  Start and end position ROM limiter essential in rehabilitation patients, with clear numbering and signals for easy use
  • Upholstery: SKAY Pyton, resistant to user’s transpiration and wear. Available in 15 different colours
  • Anatomic upholstery: Made of individual parts adapted to back anatomy.
  • Porch: Height of 1388 mm for an ampler vision during the exercise and a general visual space
  • Arm and foot lever advances: When required, arm and foot lever advances have been included to enable user to advance the exercise lever to the start position.
  • Counterbalanced exercise arms: Eliminates the effect of the weight of the exercise lever. Permits the user to lift only the amount of weight selected, allowing lowest possible initial weight
  • Numbers in all regulations
  • Easy readjustment of the belt
Published in lower body

 

See Features

Technical features Anatomic

  • Instructional information: All instructions can be easily read from the exercise position. It includes user instructions and range of motion diagram, plus a description and a drawing of the muscles used during the exercise
  • Belt transmission: The kevlar reinforced belt used can stand up to ten times the required force
  • Guided rods: Hard-chrome and polished steel guided rods, free of wear and corrosion
  • Weight plates: Power coated calibrated cast iron plates with polished edges and with free floating bushings to ensure smooth travel
  • Frame: 4 mm structural steel tube and MIG welding
  • Paint: Polyester powder coat paint, metalized, offering an attractive and durable finish. Available in 15 different colors
  • Pulley wheels: Made of reinforced nylon to assure maximum resistance. It has grooved inside edges for a silent and smooth functioning
  • Enclosure: Translucent design permits weight travel visualization. Also safety UE norm 957 –1/2 is fully complied
  • Pads and platforms: High-density foam (150 kg / cm). Foot platforms and other areas are covered with 3M, anti –slippery material to assure stability and protect paint
  • Selector pin: Positive locking selector pin with ball locking mechanism to keep the pin securely in place during exercise. Security lanyard (pigtail) to avoid loss or theft. Always accessible from working position
  • Hand grips: Made of long lasting, anti-slip, antiallergic and comfortable rubber.
  • Cams: All cams have been designed to fit the particular muscle group profile in order to accurately match the capabilities of each muscle
  • Rom limiter:  Start and end position ROM limiter essential in rehabilitation patients, with clear numbering and signals for easy use
  • Upholstery: SKAY Pyton, resistant to user’s transpiration and wear. Available in 15 different colours
  • Anatomic upholstery: Made of individual parts adapted to back anatomy.
  • Porch: Height of 1388 mm for an ampler vision during the exercise and a general visual space
  • Arm and foot lever advances: When required, arm and foot lever advances have been included to enable user to advance the exercise lever to the start position.
  • Counterbalanced exercise arms: Eliminates the effect of the weight of the exercise lever. Permits the user to lift only the amount of weight selected, allowing lowest possible initial weight
  • Numbers in all regulations
  • Easy readjustment of the belt
Published in lower body

 

See Features

Technical features Anatomic

  • Instructional information: All instructions can be easily read from the exercise position. It includes user instructions and range of motion diagram, plus a description and a drawing of the muscles used during the exercise
  • Belt transmission: The kevlar reinforced belt used can stand up to ten times the required force
  • Guided rods: Hard-chrome and polished steel guided rods, free of wear and corrosion
  • Weight plates: Power coated calibrated cast iron plates with polished edges and with free floating bushings to ensure smooth travel
  • Frame: 4 mm structural steel tube and MIG welding
  • Paint: Polyester powder coat paint, metalized, offering an attractive and durable finish. Available in 15 different colors
  • Pulley wheels: Made of reinforced nylon to assure maximum resistance. It has grooved inside edges for a silent and smooth functioning
  • Enclosure: Translucent design permits weight travel visualization. Also safety UE norm 957 –1/2 is fully complied
  • Pads and platforms: High-density foam (150 kg / cm). Foot platforms and other areas are covered with 3M, anti –slippery material to assure stability and protect paint
  • Selector pin: Positive locking selector pin with ball locking mechanism to keep the pin securely in place during exercise. Security lanyard (pigtail) to avoid loss or theft. Always accessible from working position
  • Hand grips: Made of long lasting, anti-slip, antiallergic and comfortable rubber.
  • Cams: All cams have been designed to fit the particular muscle group profile in order to accurately match the capabilities of each muscle
  • Rom limiter:  Start and end position ROM limiter essential in rehabilitation patients, with clear numbering and signals for easy use
  • Upholstery: SKAY Pyton, resistant to user’s transpiration and wear. Available in 15 different colours
  • Anatomic upholstery: Made of individual parts adapted to back anatomy.
  • Porch: Height of 1388 mm for an ampler vision during the exercise and a general visual space
  • Arm and foot lever advances: When required, arm and foot lever advances have been included to enable user to advance the exercise lever to the start position.
  • Counterbalanced exercise arms: Eliminates the effect of the weight of the exercise lever. Permits the user to lift only the amount of weight selected, allowing lowest possible initial weight
  • Numbers in all regulations
  • Easy readjustment of the belt
Published in lower body

 

See Features

Technical features Anatomic

  • Instructional information: All instructions can be easily read from the exercise position. It includes user instructions and range of motion diagram, plus a description and a drawing of the muscles used during the exercise
  • Belt transmission: The kevlar reinforced belt used can stand up to ten times the required force
  • Guided rods: Hard-chrome and polished steel guided rods, free of wear and corrosion
  • Weight plates: Power coated calibrated cast iron plates with polished edges and with free floating bushings to ensure smooth travel
  • Frame: 4 mm structural steel tube and MIG welding
  • Paint: Polyester powder coat paint, metalized, offering an attractive and durable finish. Available in 15 different colors
  • Pulley wheels: Made of reinforced nylon to assure maximum resistance. It has grooved inside edges for a silent and smooth functioning
  • Enclosure: Translucent design permits weight travel visualization. Also safety UE norm 957 –1/2 is fully complied
  • Pads and platforms: High-density foam (150 kg / cm). Foot platforms and other areas are covered with 3M, anti –slippery material to assure stability and protect paint
  • Selector pin: Positive locking selector pin with ball locking mechanism to keep the pin securely in place during exercise. Security lanyard (pigtail) to avoid loss or theft. Always accessible from working position
  • Hand grips: Made of long lasting, anti-slip, antiallergic and comfortable rubber.
  • Cams: All cams have been designed to fit the particular muscle group profile in order to accurately match the capabilities of each muscle
  • Rom limiter:  Start and end position ROM limiter essential in rehabilitation patients, with clear numbering and signals for easy use
  • Upholstery: SKAY Pyton, resistant to user’s transpiration and wear. Available in 15 different colours
  • Anatomic upholstery: Made of individual parts adapted to back anatomy.
  • Porch: Height of 1388 mm for an ampler vision during the exercise and a general visual space
  • Arm and foot lever advances: When required, arm and foot lever advances have been included to enable user to advance the exercise lever to the start position.
  • Counterbalanced exercise arms: Eliminates the effect of the weight of the exercise lever. Permits the user to lift only the amount of weight selected, allowing lowest possible initial weight
  • Numbers in all regulations
  • Easy readjustment of the belt
Published in lower body

 

See Features

Technical features Anatomic

  • Instructional information: All instructions can be easily read from the exercise position. It includes user instructions and range of motion diagram, plus a description and a drawing of the muscles used during the exercise
  • Belt transmission: The kevlar reinforced belt used can stand up to ten times the required force
  • Guided rods: Hard-chrome and polished steel guided rods, free of wear and corrosion
  • Weight plates: Power coated calibrated cast iron plates with polished edges and with free floating bushings to ensure smooth travel
  • Frame: 4 mm structural steel tube and MIG welding
  • Paint: Polyester powder coat paint, metalized, offering an attractive and durable finish. Available in 15 different colors
  • Pulley wheels: Made of reinforced nylon to assure maximum resistance. It has grooved inside edges for a silent and smooth functioning
  • Enclosure: Translucent design permits weight travel visualization. Also safety UE norm 957 –1/2 is fully complied
  • Pads and platforms: High-density foam (150 kg / cm). Foot platforms and other areas are covered with 3M, anti –slippery material to assure stability and protect paint
  • Selector pin: Positive locking selector pin with ball locking mechanism to keep the pin securely in place during exercise. Security lanyard (pigtail) to avoid loss or theft. Always accessible from working position
  • Hand grips: Made of long lasting, anti-slip, antiallergic and comfortable rubber.
  • Cams: All cams have been designed to fit the particular muscle group profile in order to accurately match the capabilities of each muscle
  • Rom limiter:  Start and end position ROM limiter essential in rehabilitation patients, with clear numbering and signals for easy use
  • Upholstery: SKAY Pyton, resistant to user’s transpiration and wear. Available in 15 different colours
  • Anatomic upholstery: Made of individual parts adapted to back anatomy.
  • Porch: Height of 1388 mm for an ampler vision during the exercise and a general visual space
  • Arm and foot lever advances: When required, arm and foot lever advances have been included to enable user to advance the exercise lever to the start position.
  • Counterbalanced exercise arms: Eliminates the effect of the weight of the exercise lever. Permits the user to lift only the amount of weight selected, allowing lowest possible initial weight
  • Numbers in all regulations
  • Easy readjustment of the belt
Published in lower body

 

See Features

Technical features Anatomic

  • Instructional information: All instructions can be easily read from the exercise position. It includes user instructions and range of motion diagram, plus a description and a drawing of the muscles used during the exercise
  • Belt transmission: The kevlar reinforced belt used can stand up to ten times the required force
  • Guided rods: Hard-chrome and polished steel guided rods, free of wear and corrosion
  • Weight plates: Power coated calibrated cast iron plates with polished edges and with free floating bushings to ensure smooth travel
  • Frame: 4 mm structural steel tube and MIG welding
  • Paint: Polyester powder coat paint, metalized, offering an attractive and durable finish. Available in 15 different colors
  • Pulley wheels: Made of reinforced nylon to assure maximum resistance. It has grooved inside edges for a silent and smooth functioning
  • Enclosure: Translucent design permits weight travel visualization. Also safety UE norm 957 –1/2 is fully complied
  • Pads and platforms: High-density foam (150 kg / cm). Foot platforms and other areas are covered with 3M, anti –slippery material to assure stability and protect paint
  • Selector pin: Positive locking selector pin with ball locking mechanism to keep the pin securely in place during exercise. Security lanyard (pigtail) to avoid loss or theft. Always accessible from working position
  • Hand grips: Made of long lasting, anti-slip, antiallergic and comfortable rubber.
  • Cams: All cams have been designed to fit the particular muscle group profile in order to accurately match the capabilities of each muscle
  • Rom limiter:  Start and end position ROM limiter essential in rehabilitation patients, with clear numbering and signals for easy use
  • Upholstery: SKAY Pyton, resistant to user’s transpiration and wear. Available in 15 different colours
  • Anatomic upholstery: Made of individual parts adapted to back anatomy.
  • Porch: Height of 1388 mm for an ampler vision during the exercise and a general visual space
  • Arm and foot lever advances: When required, arm and foot lever advances have been included to enable user to advance the exercise lever to the start position.
  • Counterbalanced exercise arms: Eliminates the effect of the weight of the exercise lever. Permits the user to lift only the amount of weight selected, allowing lowest possible initial weight
  • Numbers in all regulations
  • Easy readjustment of the belt
Published in lower body
Page 1 of 3